Yamaha MOTIF ES Owner's Manual page 235

[F5] AUDIO IN
From this display, you can set parameters related to the Audio Input Part in the Song mode.
The parameters are the same as in Performance Common Edit. See page 214.
[F6] EFFECT
n
For information on the effect connections in the Song mode, see page 180.
[SF1] CONNECT
[SF2] INS SW (Insertion Switch)
[SF3] PLG EF (Plug-in Effect)
[SF4] REVERB
[SF5] CHORUS
Part Edit
These parameters are for editing the individual Parts that make up a Song Mixing. Press the [F6] button to switch among the various Part
displays — the display for Parts 1 - 16 to which the internal Voices are assigned, the display for Multi-part Plug-in Parts (17 - 32) to which the
PLG100-XG voices are assigned, and the display for Plug-in Parts (PLG1 - 3) to which the Plug-in Voices of the single part Plug-in board are
assigned.
n
Please note that the Multi-Part Plug-in Part (17~32) settings apply not to one individual Song but to all 64 Songs.
[F1] VOICE
[SF1] VOICE
[SF2] MODE
Mono/Poly
ArpSwitch (Arpeggio Switch)
ReceiveCh (Receive Channel)
[SF3] LIMIT
[SF4] PORTA (Portamento)
[SF5] OTHER
[F2] OUTPUT
[SF1] VOL/PAN (Volume/Pan)
[SF2] EF SEND (Effect Send)
[SF3] SELECT (Output Select)
This display gives you comprehensive control over the effect connections.
The parameters are the same as in Performance Common Edit. See page 215.
The Insertion Effects can be applied to up to eight parts. This display lets you set to which parts the Insertion Effects
are applied.
This display lets you set the Plug-in Insertion Effect related parameters when the Effect Plug-in Board PLG100-VH
has been installed. For details on each parameter, refer to the Owner's Manual included with the PLG100-VH.
The number of parameters and values available differs depending on the currently selected effect type. For more
information, see the Effect Type List in the separate Data List booklet.
[SONG] Song selection [MIXING]
Determines the Voice for each Part. For details, see page 102.
n
When the cursor is located on the Bank, you can select a Voice (with the exception of Sample Voices, Mixing Voices, and
Voices of Multi-part Plug-in Parts) via the method explained in the Quick Guide on page 102.
Determines the playback method of the Voice for each Part — monophonic (single notes only) or polyphonic
(multiple notes).
Settings: mono, poly
n
This parameter is not available for the part to which a Drum Voice is assigned.
Determines whether Arpeggio is on or off for the currently selected Part.
Settings: on, off
n
Arpeggio Switch is applied to only one Part at the same time. It cannot be applied to multiple Parts simultaneously.
n
Arpeggio Switch is not available for the Multi-part Plug-in Parts 17~32.
Determines the MIDI receive channel for the selected Part. Since MIDI data may be coming from many channels at
once, you should set this to match the particular channel over which the desired controlling data is being sent.
Settings: 01~16, off
From this display you can determine the note range and velocity range for each Part.
The parameters are the same as in Performance Part Edit. See page 216.
Determines the Portamento parameters for each Part.
The parameters are the same as in Performance Part Edit. See page 216.
n
The Mode setting is not available for the Multi Plug-in parts 17-32 and the Plug-in parts 1-3.
Same as in Performance Part Edit. See page 217.
n
For Multi-part Plug-in Parts 17 - 32 and Plug-in Parts 1 - 3, Pitch Bend Upper and Lower become a single parameter: PB
Range. Upper and Lower values cannot be set independently for Plug-in Parts. See page 164.
Same as in Performance Part Edit. See page 217.
n
The Voice Element Pan setting is not available for Multi-part Plug-in Parts 17 - 32 and Plug-in Parts 1 - 3.
Same as in Performance Part Edit. See page 217.
From this display you can assign individual Parts to sound from independent output connectors (jacks).
The parameters are the same as in Performance Part Edit. See page 218.
Song Mixing Edit mode
[EDIT] Part selection
Part Edit
235
Owner's Manual