Channel Filter; Selecting The Operation Mode; Calling/Leaving Menu; Menu Navigation - SMART Joy S2 User Manual

5.5.3

Channel Filter

 Select Erotic and/or Call TV by pressing the keys PR+ and PR-, and select the option Yes to
include such channels into the channel list or No to not include such channels by respectively
pressing V+ / V-.
 Press OK to store your settings and to finish installation of the RAPS channel list. After this, TV
operation will automatically start.
5.6

Selecting the Operation Mode


You can select between the operation modes TV (TV channels) and RADIO (radio channels) as
follows:
Press the key TV/RADIO on the remote control.

Press again the key TV/RADIO to return to the previous operation mode.

5.7

Calling/Leaving Menu

 To call the menu, press the key MENU (of the remote control or at the receiver). The menu is
called.
Press the EXIT key to leave the menu or to go back one step.

5.8

Menu Navigation

The menu items with the settings for TV and radio can be respectively accessed in the two operation
modes TV and Radio.
 Press PR+ to select the menu item above.
 Press PR- to select the menu item below.
 Press OK/LIST, to select a menu item or to confirm a set value. Depending on the settings in the
menu Parental Lock you must insert the PIN.
 Press V+ to change resp. increase the selected value or go to the right side of the screen (sub-
menus).
 Press V- to change resp. decrease the selected value or go to the left side of the screen (main
menu).
Active menu items are color-marked.
Although most settings for TV operation are made, you can also make some further settings via the
menu.
5.9

Parental Lock

5.9.1 Menu Lock
Here you can set whether access to the settings menus is to be protected by a password.
5.9.2

PIN

Here you can set whether certain channels (see TV Channel List) are to be protected by a password.
TV is the operation mode after first switching-on of the receiver (or after resto-
ration of factory settings).
Basic Operation
15