4. Sound Length
Sets the note length (gate time).
This setting applies to all active notes in the current layer.
The LED buttons adjust the Sound Length in the increments listed below. You can also use
the jog dial for finer adjustment in +/-10 millisecond increments.
This display also appears when the [L2] button is pressed.
●
Depending on the voice used, setting a shorter Sound Length may have no effect, or changing the Sound
Length may result in inconsistent sound. Also, the maximum length of user voices is 0.97 seconds, and
setting a longer Sound length will have no effect.
■
Range . . . . . . . . . . . . 10 msec — 9990 msec
■
Default . . . . . . . . . . . 100 msec (all layers)
■
LED Buttons . . . . . . . The selected values are displayed as illustrated below. Settings can also be made via the
LED buttons.
[Reference]
❊
➝
Function Button [L2] (
Page
Setting Parameters with the Jog Dial
Sound Length
Layer[01]
100msec
Gate Time
Values selected via the LED buttons.
Matrix display related to settings made via the jog dial.
25)
Parameter Settings
■ Layer Menu
∞
Current Layer Number
TENORI-ON Manual
52