Bounce Mode - Yamaha TNR-W Manual

Bounce Mode

The Bounce Mode is assigned to layer 14.
Bounce Mode Operation
Press an LED button and the light will "drop" from that button, bounce back from the bottom
of the matrix, and repeat. The corresponding note will sound when the light bounces at the
bottom row.
The higher the entry point, the longer the interval between the sound. By choosing
appropriate entry points you can set the repeat interval as required.
[Reference]
❊
The illuminated dots move at a speed corresponding to the timing of the LED buttons: i.e. 1 beat per dot.
➝
(Loop Speed Page 29, 51. Master Loop Speed
In the Bounce Mode the pitches are arranged horizontally. As in the Score Mode the factory
default scale is an ionian scale, corresponding to the white keys on a piano, with the lowest
pitch on the left and the highest on the right.
Press the lowest LED button to stop activity in that column.
[Reference]
❊
Selecting a scale other than the ionian scale. (Master Scale
❊
Changing octaves. (Octave
❊
The note length (gate time) can be changed as required. (Sound Length
Entry Point
Low
Pitch
➝
Page 45).
➝
Page 26)
High
Note sounds at the lowest row.
The TENORI-ON Is ...
Performance Modes
➝
Page 44)
➝
Page 25, 52)
The light will drop from the entry
point and sound at the bottom row.
Bounces between
the entry point
Bounces back
and lowest row.
from the lowest
row.
TENORI-ON Manual
Bounce Mode
19