Table of Contents
Advertisement
6
Press the [OK] button to load the selected file.
The display shown below will appear while the file is being loaded.
Press the [OK] or [CANCEL] button to cancel the load operation.
7
When the Current Layer file has been loaded the display shown in step
appear, and playback of the Current Layer file will begin.
Press the [OK] button in the status display when you want to stop playback.
●
Save Current Layer
Saves a Current Layer file containing all active notes and settings such as voice, tempo, etc.,
for the current layer in the current block to an SD Memory Card.
1
Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2
Use the jog dial and [OK] button to navigate to the Current Layer function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Layer"
3
Use the jog dial to highlight the "Save" function, then press the [OK] button.
4
The file name entry display will appear. A default file name will be provided, which you
can either use as-is or replace with a name of your own.
File name entry procedure is described in the Rename Song section on
●
File names can be up to 16 characters in length. The file extension will be added automatically.
Current Layer File Name
Available Characters
Setting Parameters with the Jog Dial
Current Layer Number
Layer[01]:
∞
"0302E-LAYER-02
"
Loading...
CANCEL
Layer[01]:
∞
Operation:
Load
Layer[01]:
∞
Operation:
Save
Input File Name
∞
[0302E-LAYER-02
]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789
ª§
Parameter Settings
■ File Menu
The name of the Current Layer file
being loaded.
3
, above, will
Page
65.
Input Cursor
Set File Name
Backspace & Delete 1 Character
79
TENORI-ON Manual
Advertisement
Table of Contents
