[L5] Loop Speed - Yamaha TNR-W Manual

[L5] Loop Speed

Sets the loop playback speed (the duration of the beats).
When the [L5] buttons is pressed the LED button column corresponding to the current
setting will light. Four settings are available, set via the leftmost four columns on the matrix:
quarter notes, eighth notes, sixteenth notes, and thirty-second notes.
While holding the [L5] button press a button in the corresponding column. LED buttons in
other columns have no effect.
●
Not available in the Push Mode.
●
This setting will be changed if the Master Loop Speed (all layers) parameter in the Play menu is changed.
■
Range . . . . . . . . . . . . 1 (quarter note), 2 (eighth note), 4 (sixteenth note), 8 (thirty-second note)
■
Default . . . . . . . . . . . 4 (The layer 14 default is 8)
[Reference]
❊
Play menu/Master Loop Speed (
Setting Parameters with the Function Buttons
Loop Speed
Layer[01]
4
Loop Speed
➝
Page 45), Layer menu/Loop Speed (
Parameter Settings
[L5] Loop Speed
∞
Current Layer Number
➝
Page 51)
TENORI-ON Manual
29