Yamaha TNR-W Manual page 8

Connecting Two TENORI-ON Instruments
Synchronize
MASTER
MASTER TENORI-ON
MIDI
Supplied MIDI Cable
MIDI OUT
Adaptor
MIDI IN
Connecting More than Two TENORI-ON Instruments
Synchronize
MASTER
MASTER TENORI-ON
MIDI
Supplied
MIDI OUT
MIDI Cable
Adaptor
MIDI IN
Power-on Procedure
If you have the TENORI-ON connected to an external sound system, it is important to turn
the devices in your audio chain on in the correct order to prevent unwanted noise as well as
possible damage to your equipment.
Before turning the power on, make sure that any volume controls on all devices are turned all
the way down.
When turning power on, you should normally begin with the source and end with power
amplifiers or powered speakers. Here's an example:
1. 2.
TENORI-ON Mixer
The opposite applies when turning power off:
1.
Powered Speakers
∞
MIDI Cable
∞
MIDI
MIDI IN MIDI OUT
Cable
MIDI
MIDI Interface
MIDI
Cable
Cable
MIDI OUT
3.
Powered Speakers
2. 3.
Mixer TENORI-ON
The TENORI-ON Is ...
Connecting to Second TENORI-ON or Computer
Synchronize
SLAVE
SLAVE TENORI-ON
MIDI
Supplied MIDI
MIDI OUT
Cable Adaptor
MIDI IN
Synchronize
SLAVE
SLAVE TENORI-ON
MIDI
MIDI OUT
Supplied
MIDI Cable
MIDI IN
Adaptor
MIDI OUT
MIDI IN
TENORI-ON Manual
∞
∞
MIDI
Supplied
MIDI Cable
Adaptor
8