Master Transpose; Master Loop Speed - Yamaha TNR-W Manual

4. Master Transpose

Sets transposition for all layers and blocks.
This display also appears when the [R3] button is pressed.
●
Changes will not be applied to notes that are already playing in the Push or Solo modes, or currently playing
notes if a long Sound length has been specified.
■
Range . . . . . . . . . . . . -7 — +8 (semitone increments)
■
Default . . . . . . . . . . . 0
■
LED Buttons . . . . . . . Values are displayed on the LED button matrix as illustrated below. Adjustments can be
made via the LED buttons.
The eighth row from the bottom produces no transposition (a "0" setting). Each row above that
shifts the pitch up by the corresponding number of semitones up to "+8", while each row below
that lowers the pitch by the corresponding number of semitones down to "-7".
[Reference]
❊ ➝
Function Button [R3] ( Page

5. Master Loop Speed

Sets the loop speed (the length of each beat) for all layers and blocks.
■
Range . . . . . . . . . . . . 1 (quarter note), 2 (eighth note), 4 (sixteenth note), 8 (thirty-second note)
■
Default . . . . . . . . . . . 4
■
LED Buttons . . . . . . . No display
[Reference]
❊
Layer menu/Loop Speed (
Setting Parameters with the Jog Dial
Master Transpose
+1
+8
+7
+6
+5
+4
+3
+2
+1
0
-1
-2
-3
-4
-5
-6
-7
32)
Master Loop Speed ∞
4
➝
Page 51)
Parameter Settings
∞
TENORI-ON Manual
■ Play Menu
45