Yamaha TNR-W Manual page 82

Delete Current Layer
●
Deletes a specified Current Layer file from an SD Memory Card.
1
Insert the SD Memory Card containing the file you want to delete into the TENORI-ON
card slot.
2
Use the jog dial and [OK] button to navigate to the Current Layer function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Layer"
3
Use the jog dial to highlight the "Delete" function, then press the [OK] button.
4
Current Layer files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to delete.
●
Only files that are in Current Layer format will be displayed.
5
Press the [OK] button to delete the selected file.
A confirmation display like the one shown below will appear.
Press the [OK] button if it's OK to delete the file. Press the [CANCEL] button (or use the
jog dial to select "CANCEL" on the LCD and then press the [OK] button) to cancel the
operation and leave the file unaltered.
If you press the [OK] button to execute the delete operation, "Executing ..." will appear
on the display while the file is being deleted.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Executing..." display is showing.
6
The display shown in step
Setting Parameters with the Jog Dial
Layer[01]: ∞
Operation: Load
Layer[01]: ∞
Operation: Delete
Layer[01]: Delete ∞
0302E-LAYER-01
0302E-LAYER-02
0302G-LAYER-01
Delete ∞
"0302E-LAYER-02 "
OK
3
, above, will reappear when the operation has finished.
Parameter Settings
■ File Menu
82
TENORI-ON Manual