Table of Contents
Advertisement
Save Samplings
●
Saves a Samplings file currently loaded in a user memory to an SD Memory Card in ".tnw"
format.
1
Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2
Use the jog dial and [OK] button to navigate to the Samplings function menu as follows:
"Main menu" ➝ "File menu" ➝ "Samplings"
3
Use the jog dial to highlight the "Save" function, then press the [OK] button.
4
A display that allows you to specify the user memory containing the sample to be saved
will appear. Use the jog dial to select the desired user memory (1 — 3), then press the
[OK] button.
●
In this display "User1," "User2," and "User3" correspond to user memory numbers <01/16,> <02/16,>
and <03/16.> The bottom line on the LCD displays the name of the sample file currently loaded in that
user memory. If the user memory is empty, "--------" will be displayed.
5
The file name entry display will appear. A current file name will be displayed, which you
can either use as-is or replace with a different name.
File name entry procedure is described in the Rename Song section on
●
File names can be up to 16 characters in length. The file extension will be added automatically.
Current User Voice File Name
Available Characters
Setting Parameters with the Jog Dial
Samplings:
∞
Operation:
Load
Samplings:
∞
Operation:
Save
Samplings: Save
∞
Sour.=
User1
[1-SAMPLE
]
Input File Name
∞
[1-SAMPLE
]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789
ª§
Parameter Settings
■ File Menu
Page
65.
Input Cursor
Set File Name
Backspace & Delete 1 Character
94
TENORI-ON Manual
Advertisement
Table of Contents
