Yamaha TNR-W Manual page 77

Delete Current Block
●
Deletes a specified Current Block file from an SD Memory Card.
1
Insert the SD Memory Card containing the file you want to delete into the TENORI-ON
card slot.
2
Use the jog dial and [OK] button to navigate to the Current Block function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Block"
3
Use the jog dial to highlight the "Delete" function, then press the [OK] button.
4
Current Block files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to delete.
●
Only files that are in Current Block format will be displayed.
5
Press the [OK] button to delete the selected file.
A confirmation display like the one shown below will appear.
Press the [OK] button if it's OK to delete the file. Press the [CANCEL] button (or use the
jog dial to select "CANCEL" on the LCD and then press the [OK] button) to cancel the
operation and leave the file unaltered.
If you press the [OK] button to execute the delete operation, "Executing ..." will appear
on the display while the file is being deleted.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Executing..." display is showing.
6
The display shown in step
Setting Parameters with the Jog Dial
Block[01]: ∞
Operation: Load
Block[01]: ∞
Operation: Delete
Block[01]: Delete ∞
0302E-BLOCK-01
0302E-BLOCK-02
0302G-BLOCK-01
Delete ∞
"0302E-BLOCK-02 "
OK
3
, above, will reappear when the operation has finished.
Parameter Settings
■ File Menu
77
TENORI-ON Manual