Table of Contents
Advertisement
Load Samplings
●
Loads a Samplings file that has been saved to an SD Memory Card into the TENORI-ON.
1
Insert the SD Memory Card containing the file you want to load into the TENORI-ON
card slot.
2
Use the jog dial and [OK] button to navigate to the Samplings function menu as follows:
"Main menu" ➝ "File menu" ➝ "Samplings"
3
Use the jog dial to highlight the "Load" function, then press the [OK] button.
A display that allows you to specify the user memory to which the loaded sample file
will be saved will appear. Use the jog dial to select the desired user memory, then press
the [OK] button.
●
In this display "User1," "User2," and "User3" correspond to user memory numbers <01/16,> <02/16,>
and <03/16.> The bottom line on the LCD displays the name of the sample file currently loaded in that
user memory. If the user memory is empty, "--------" will be displayed.
4
Samplings files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to load.
●
Only files that are in "tnw" format will be displayed.
5
Press the [OK] button to load the selected file.
The display shown below will appear while the file is being loaded.
Press the [OK] or [CANCEL] button to cancel the load operation.
●
Sampling file load operations may take a few minutes to complete.
6
When the Samplings file has been loaded the display shown in step
appear.
Setting Parameters with the Jog Dial
Samplings:
∞
Operation:
Load
Samplings: Load
∞
Dest.=
User1
[1-SAMPLE
]
Samplings: Load
∞
SAMPLE071006-02
SAMPLE071001-01
SAMPLE071013-01
Samplings:
∞
"SAMPLE071001-01 "
Loading...
CANCEL
Parameter Settings
■ File Menu
The name of the Samplings file being
loaded.
2
, above, will
93
TENORI-ON Manual
Advertisement
Table of Contents
