[L4] Score Mode Loop Point - Yamaha TNR-W Manual

[L4] Score Mode Loop Point

Sets the loop playback range for the current Score Mode layer.
While holding the [L4] button slide your finger horizontally over upper half of the matrix to
move the loop TOP point indicator to the desired point, and slide your finger horizontally over
lower half of the matrix to move the loop END point indicator to the desired point, as
required. Once the start and end points are set you can use the jog dial to move the entire
range to the left or right while maintaining the set distance between the start and end points.
●
The END point cannot be moved to a position before (to the left of) the TOP point. The END point can be
moved to the same location as the TOP point, which will produce a 1-beat loop.
●
The loop points for all Score Mode layers can be set to the same points simultaneously via the Master Loop
Point (all layers) setting in the Play menu.
■
Range . . . . . . . . . . . . TOP = 1 — 16, END = 1 — 16
■
Default . . . . . . . . . . . TOP = 1, END = 16
[Reference]
❊
Play menu/Master Loop Point (
Setting Parameters with the Function Buttons
TOP Point END Point
Loop Point
Layer[01]
TOP: 5 / END:15
TOP Point END Point
➝
Page 46)
Parameter Settings
[L4] Score Mode Loop Point
∞
Current Layer Number
TENORI-ON Manual
27