Sound Menu - Yamaha neoHD WiFi YMC-700 Owner's Manual

Setup menu
• Speaker Level
Use this feature to manually balance the speaker levels.
Control range: -20 to +20 (Test Tone: Off, On)
Initial setting: 0 (Test Tone: Off, SWFR: +6)
Control step: I
Bass Out
Use this feature to select the speakers from which the LFE
(low-frequency effect) and the low-frequency signals will
be output.
Output of LFE signals
Test Tone
FL
Turns the test tone output on or off.
Adjusts the front left speaker level.
Both
Output Not output Not output FR
Adjusts the front right speaker level.
Subwoofer Output Not output Not output C Adjusts the center speaker level.
Front
Not output
Output Not output
SL Adjusts the surround left speaker level.
Output of low-frequency signals
SR Adjusts the surround right speaker level.
• Reset
Use this menu to reset the speaker settings.
Both
Subwoofer
*1
*4
*2
*3
*3
*3
SWFR
Yes
Adjusts the subwoofer level.
Resets the speaker related settings.
Front Not output *1
*3
No Cancels resetting.
Note
Turns off the AIR SURROUND XTREME
function.
Turns on the AIR SURROUND XTREME
function.
Off
On
• When surround speakers are connected, "- - -" is displayed and
you cannot set the "Air Surround Xtreme" setting. The AIR
SURROUND XTREME function is not available in this case.
• When DSP Program is set to "Off' or "Music Enhancer", the
AIR SURROUND XTREME function is deactivated.
• When "Air Surround Xtreme" is set to "Yes", the connected
external sources output Dolby Digital or PCM signals instead of
Dolby TrueHD or Dolby Digital Plus signals. For details, refer
to the owner's manual of the component.
Use this menu to change the various sound settings.
The choices indicated in bold are selected by default.
• Air Surround Xtreme
The AIR SURROUND XTREME technology enables you
to enjoy up to 7. I-channel sound (when multi-channel
PCM signals are input) without using surround speakers
by simulating sound from virtual speakers.
Does not change the phase of your
subwoofer.
Sets the phase of the subwoofer to reverse. Reverse
Normal
Crossover
Use this feature to select the crossover frequency of
speakers that are set to "Small". All frequencies below the
selected frequency are sent to the subwoofer or to the
speakers set to "Large".
Choices: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 160Hz,
200Hz
Subwoofer Phase
Use this feature to switch the phase of your subwoofer if
the bass sound is too weak or unclear.
When "Front" is selected, you cannot adjust the subwoofer level
using the pop up menu.
*
I Output(s) the low-frequency signals of the front channels and
other speakers set to "Small".
*2 Always output the low-frequency signals of the front
channels.
*3
Output the low-frequency signals if the speakers are set to
"Large".
*4 Outputs the low-frequency signals of the speakers set to
"Small".
38
En