[L1] Instrument - Yamaha TNR-W Manual

[L1] Instrument

Selects the voice for the current layer.
When you press and hold the [L1] button vertical and horizontal lines will light on the matrix,
and the button at their intersection corresponds to the currently selected voice. If you press a
different LED button while these crossed lines are showing the intersection will move to that
button and the corresponding voice will be selected.
Refer to the Voice List on
Voice numbers <01/16>, <02/16>, and <03/16> are user voices.
●
When a user voice is selected from a preset voice, the Sound Length (
Conversely, when a preset voice is selected from a user voice the sound length for all other voices will be set
to 100 (msec).
●
Changes will not be applied to notes that are already playing in the Push or Solo modes, or currently playing
notes if a long Sound length has been specified.
■
Range . . . . . . . . . . . . Vertical axis: 01 — 16. Horizontal axis: 01 — 16
■
Default . . . . . . . . . . . Different for each layer
The intersection of the crossed lines is the current voice number
(in this example: <06/10>).
[Reference]
❊ ➝
Layer menu/Instrument (
Setting Parameters with the Function Buttons
Page 119 for a complete list of voice numbers and names.
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Instrument
Layer[01]
01/01:Photon
Voice Number Voice Name
➝
Page 49), Voice List ( Page 119)
Parameter Settings
[L1] Instrument
➝
Page 52) will be set to 1000 (msec).
∞
Current Layer Number
TENORI-ON Manual
24