Yamaha TNR-W Manual page 92

5
Click the [EXIT] button to quit the software.
6
Insert the SD Memory Card to which the file was saved in step
TENORI-ON card slot.
7
Load the file from the SD Memory Card into a user memory. Refer to "Load
Samplings" on Page 93
User voice setup is now complete.
8
Play the user voice.
You can now select the user voice by pressing the corresponding LED button while
holding the [L1] button, in the same way as you select the internal voices.
●
Octave, transpose, and scale settings do not affect the user voices.
●
User voices are retained in memory even when the TENORI-ON is turned off.
●
In order to play a song that uses a user voice on a different TENORI-ON, the user voice file must
first be loaded into the TENORI-ON on which the song is to be played (
Page 94, and "Load Samplings" on
Setting Parameters with the Jog Dial
for details.
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Page 93).
Parameter Settings
■ File Menu
4
, above, into the
USER3<03/16>
USER2<02/16>
USER1<01/16>
➝
"Save Samplings" on
TENORI-ON Manual
92