Wireless - Intellinet 524360 (Annex A) User Manual

lAn clients' IP addresses when this time threshold period is terminated.
DNS Relay: A domain name System (dnS) server is like an index of IP and
Web addresses. If you type a Web address into your browser, such as "www.
router.com," a dnS server will find that name in its index and the matching IP
address. Select "Use Auto discovered dnS Server only" to auto-set the dnS
server. If there is a dnS server that you would rather use, select "Use discovered
dnS Server only" and specify the IP address of that dnS server.
Primary DNS Server: enter the ISP's dnS server IP address or specify your own
preferred dnS server IP address.
Secondary DNS Server: This is optional. You can enter another dnS server's
IP address as a backup. The secondary dnS will be used should the primary
dnS fail.

Wireless

POLAND
ACCESS POINT SETTINGS
Access Point: Activate or deactivate the wireless function of the router. When
activated, the router will be an access point for other wireless clients to connect.
Channel: This is the radio channel used by the wireless lAn. All devices on the
same WlAn should use the same channel. Select the country you're in and
designate a channel the router will use. NOTE: In the USA/Canada, only channels
1–11 can be operated; in Europe, only channels 1–13 can be operated. To allow
the router to automatically find an available channel with the greatest signal
strength, select "Auto." The auto-selective channel will be shown in the "Current
Channel" field.
19
Web MAnAGeMenT
524360_524377_01_man.indd 19 12/18/08 2:23:49 PM