Intellinet 524360 (Annex A) User Manual page 21

MCS: Select "MCS 0" through "MCS 15" to configure the data rate of the11n
network. When "MCS 15" is selected, the data rate is up to 300 Mbps. It is
recommended to select "Auto" so the router will negotiate with wireless clients to
operate with a proper data rate.
MULTIPLE SSID SETTINGS
SSID Index: The router supports multiple SSIds. by default, however, this function
is disabled.
Broadcast SSID: Select "Yes" to make the SSId visible so wireless clients can
scan the router within the network. Select "no" to hide the SSId. Wireless
clients need to set the same SSId of the router in order to access the network.
WMM: Wi-Fi Multi Media (WMM) enhances the data transfer performance of
multimedia contents when they're being transferred over a wireless network.
Use WPS: Select "Yes" to enable the Wi-Fi Protected Setup; "no" to disable it.
WPS SETTINGS
Wi-Fi Protected Setup (WPS) is the simplest way to build connections between
wireless network clients and this router. Instead of selecting an encryption mode
and entering a long encryption passphrase every time you need to set up a
wireless client, just press a wireless client button and a router button and the
WPS will do the setup for you.
The Wireless n AdSl2+ 4-Port Modem Router supports two types of WPS:
push-button configuration (PbC) and PIn code. To use PbC, switch the router
to WPS mode and push a specific button on the wireless client to start WPS
mode. You can push the Reset/WPS button on the router or select "PbC" and
click "Start WPS" on the WPS setup screen to do this. To use PIn code, you
need to know the PIn code of the wireless client and switch it to WPS mode,
then set the PIn code of the wireless client you want to connect to the router on
the WPS setup screen and click "Start WPS" to start WPS mode.
WPS State: If the wireless security (encryption) function of the router is enabled,
a "Configured" message will display here. If the wireless security function has
not been set, "Unconfigured" will display.
WPS Mode: When PIn code is selected, you need to enter the 8-digit PIn code
of the wireless client you want to connect to the router. If PbC mode is selected,
just click "Start WPS" to start WPS mode.
AP Self PIN Code: This is the PIn code of the router, which you can enter so the
wireless client can start WPS mode to connect to the router. The security settings of
the router will be set to match those of the wireless client.
Enrollee PIN Code: enter the PIn code of the wireless client here. If you've
entered the PIn code of the wireless client and switch to WPS mode, the security
settings of the wireless client will be set to match those of the router.
21
Web MAnAGeMenT
524360_524377_01_man.indd 21 12/18/08 2:23:50 PM