Intellinet 524360 (Annex A) User Manual page 9

4. The wizard will try to connect
to the ISP you have selected.
If the connection fails, run the
wizard to select the ISP again.
5. With a successful ISP
connection, the Congratulations
confirmation screen will display.
To move on to the Web
management of the router, click
"Advanced Settings"; to close
the wizard, click "Finish."
Manually Set ISP
If the ISP can't be located using the wizard, follow the steps below to configure
the ISP settings manually. Confirm what kind of service is being provided — as
shown here — and keep the information for future reference.
PPPoE
PPPoA
RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing to use
RFC1483 Routed
1. on the Select ISP screen, select
"other."
524360_524377_01_man.indd 9
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service name).
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password.
bridged Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP Address,
Subnet Mask, Gateway Address and domain name
System (dnS) IP Address (a fixed IP Address).
SoFTWARe/SeTUP WIZARd
9
12/18/08 2:23:42 PM