Table of Contents
Advertisement
2. With the Select the Internet
Connection Type..." screen
displayed, make a selection
and click "next." NOTE: The
wizard will automatically select
the country that you're in (by
identifying the language of the
computer's operating system),
and will then display the Select
ISP screen. If you want to change the country, click "back" instead of "next."
3. In the VPI, VCI and Encapsulation
fields, enter the data provided
by your ISP. If the connection
type is static IP address, enter
the IP address information
provided by your ISP. (For
details, see Web Management /
Interface Setup.) Click "next."
4. If needed, enter your username
and password (twice) in the
corresponding fields. Click
"next."
5. When the Settings overview
screen appears, click "Save,"
which will reboot the router.
After saving and rebooting, the
ISP settings are complete.
NOTE: To use the router to access
the Internet, the IP address of each
PC has to be set in the same
subnet as the router. This wizard will help to set the
proper IP address(es), and will display a status screen
(right) indicating so.
NOTE: by default, the router's dHCP server is enabled. If it is disabled before
running the setup wizard, the wizard will automatically enable it.
10
SoFTWARe/SeTUP WIZARd
524360_524377_01_man.indd 10
Other
Other
12/18/08 2:23:43 PM
Advertisement
Table of Contents
