Intellinet 524360 (Annex A) User Manual page 18

Dynamic Route: dynamic routing allows routing tables in routers to change
as the possible routes change. This router supports RIP1, RIP2-b and RIP2-M
protocols for dynamic routing. After the RIP protocol is selected, choose the RIP
direction from among "none," "both," "In only" or "oUT only."
Multicast: To specify the method of transmitting data simultaneously to many
receivers, select "IGMP v1" or "IGMP v2" as the multicast protocol. or, select
"disabled" to disable the function.
IGMP Snoop: When IGMP (Internet Group Management Protocol) Snoop is
enabled, the router can make intelligent multicast forwarding decisions by
examining the contents of each frame's IP header. Without the function, the
router will broadcast the multicast packets to each port, which could create
excessive traffic on the network and degrade network performance.
DHCP
DHCP: by enabling the dHCP server, the router will automatically assign your
lAn clients an IP address. If the dHCP is disabled, lAn clients' IP addresses
need to be manually set.
Starting IP Address: If the dHCP server is enabled, set the "Starting IP Address,"
which will be the first IP address assigned to the lAn client. by default, the starting
IP address is 192.168.2.100.
IP Pool Count: A particular IP address range can be selected for your dHCP
server to issue IP addresses to your lAn clients. by default, the IP pool count is
100. The IP range is from 192.168.2.100 to 192.168.2.199.
Lease Time: In this setting, the time period during which the dHCP server lends
IP addresses to your lAn clients can be specified. The dHCP will change your
18
Web MAnAGeMenT
524360_524377_01_man.indd 18 12/18/08 2:23:48 PM