Advanced Setup; Firewall; Routing - Intellinet 524360 (Annex A) User Manual

ADvAnCeD setup

Firewall

FIREWALL
Firewall: Selecting "enabled" protects against SYn flooding attack, Ping of
death, Teardrop and land attack.
SPI: When "enabled," all traffic initiated from a WAn site will be blocked.

Routing

ROUTING TABLE LIST — The current routing table of the router can be viewed
here. To add another routing rule, click "Add RoUTe." (See Add Route below.)
Dest IP: Shows the IP address of the destination lAn.
Mask: Shows the subnet mask of the destination lAn. If it shows "8," the subnet
mask is "255.0.0.0"; "16" means the subnet mask is "255.255.0.0"; "24" means
the subnet mask is "255.255.255.0."
Gateway IP: This is the IP of the neighbor router that this router should communicate
with on the path to the destination lAn.
Metric: This is the number of hops (routers) to pass through to reach the destination
lAn. It must be between 1 and 15.
Device: Shows the interface that goes to the next hop (router), such as a lAn port.
Use: This is the counter for access time.
Edit: This is for editing the route, and is not shown for the system default route.
Drop: This is for dropping the route, and is not shown for the system default route.
23
Web MAnAGeMenT
524360_524377_01_man.indd 23 12/18/08 2:23:51 PM