Intellinet 524360 (Annex A) User Manual page 28

IP/MAC FILTER
IP Filter Set Index: This is the item number to record the setting.
Interface: Select which channel (PVC) to configure.
Direction: Select the access to the Internet ("outgoing") or from the Internet
("Incoming") or "both."
IP Filter Rule Index: This is the item number to record the setting rule.
Rule Type: Select to filter through the IP address or the MAC address.
Active: Select "Yes" to enable the current rule; "no" to cancel the current rule.
Source IP Address: enter the start IP address that will be monitored. enter
"0.0.0.0" for any IP address.
Subnet Mask: enter the subnet mask based on the source IP address.
Port Number: lAn users employ port numbers to differentiate network applications
(e.g., "21" is for FTP service). The port number range is from 0 to 65535.
NOTE: It's recommended that this option be configured by an advanced user.
Destination IP Address: enter the start IP address that will be monitored. enter
"0.0.0.0" for any IP address.
Subnet Mask: enter the subnet mask based on the destination IP address.
Port Number: This is the port or port ranges that define the application.
Protocol: This is the packet protocol type used by the application. Select "TCP,"
28
Web MAnAGeMenT
524360_524377_01_man.indd 28 12/18/08 2:23:54 PM