Intellinet 524360 (Annex A) User Manual page 8

3. The wizard will automatically
select the country you're in (by
identifying the language of the
computer's operating system),
and will then display the Select
ISP screen. Select the ISP. If it's
not listed, click "other" to re-
select the country, or manually
configure the ISP information (see Manually Set ISP below).
Automatically Set ISP
If the Select ISP screen does list your ISP, follow these steps so the wizard can
configure the ISP settings automatically.
1. As shown in the sample screen
at right, select the ISP of your
AdSl service.
2. If needed, enter the username
and password provided by
your ISP, then click "next."
3. When the Settings overview
screen appears, click "Save,"
which will reboot the router.
After saving and rebooting, the
ISP settings are complete.
NOTE: To use the router to access
the Internet, the IP address of each
PC has to be set in the same
subnet as the router. This wizard will help to set the
proper IP address(es), and will display a status screen
(right) indicating so.
NOTE: by default, the router's dHCP server is enabled. If it is disabled before
running the setup wizard, the wizard will automatically enable it.
8
SoFTWARe/SeTUP WIZARd
524360_524377_01_man.indd 8
Your country
12/18/08 2:23:41 PM