A1 Troubleshooting - Strong SRT 5855 User Manual

A1 Troubleshooting

Occasionally receivers can hang-up (just like with a PC) so you are recommended to reset
the receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains
power again and now check if the unit is working as expected. If the receiver does not
work properly after checking the trouble shooting section, please contact the dealer. Don't
open the receiver cover, it may cause an electrical shock due to high current voltage and
the warranty of your receiver will be void if the receiver has been opened.
Symptoms
The green/red lights
on front panel do not
light up.
No picture and
sound.
No picture and
sound.
No picture and
sound.
No sound.
26
Cause
The power cord is not
plugged in.
TV is set to wrong
channel.
Problem in cable
connections between
receiver and TV.
Receiver "hang-up".
The receiver or TV is
in "MUTE" mode.
Solution
Check that the power cord is plugged into
the wall outlet.
Check if the TV is switched on and set your
TV to the correct EXT / AV or UHF channel.
Check if the scart and/or RF cable is
connected correctly to the TV and to the
back of the receiver.
Disconnect the main power cord of the
receiver from the 220V main power.
Reapply the power and "Reset" from the
menu. Retuning as if for the first time.
Press the MUTE button on the remote
control unit of your receiver and TV.