Strong SRT 5855 User Manual page 22

2. Press BACK until you go back to main menu.
OSD Settings: You can set the OSD (On Screen Display) on your TV to your
personal preferences. You can change the OSD settings by applying the
following steps:
1. Select "OSD Settings" and press SELECT or the Right button.
2. Press BACK until you go back to main menu.
Time setting: The system uses GMT (Greenwich Mean Time) as a default. To set
the time, apply the following steps:
20
UHF Channel: Press SELECT or the Right button and set the UHF
channel number to the same UHF channel number of your TV
set. This only has to be done if your TV set is connected with a
coaxial (RF) Cable. If the UHF Channel numbers of the receiver
and the TV set are not set the same, no picture will be displayed.
Select a channel between 21 and 69 and press SELECT
to confirm.
Colour Scheme: Press SELECT or the Right button and set the
colours of the OSD menu to "Basic", "Colour 1" or "Colour 2".
Transparency: Press SELECT or the Right button and select how
transparent you want your OSD.
Brightness: Press SELECT or the Right button and select how you
want the OSD to be.
OSD Timeout: Press SELECT or the Right button and select how
long you want the information banner to be on the screen when
starting up your receiver or when changing channels.
Select GMT usage: Press SELECT or the Right button and use the
UP/DOWN buttons to select the GMT usage "ON" or "OFF".
"ON" activates the selection "Time Zone"; "OFF" activates "Set
Local Time/ Date". Press SELECT to save your setting.