Channel Set-Up - Strong SRT 5855 User Manual

Factory Reset: Be careful when using this function, because it will erase all the
data and parameters you may have set earlier to your receiver. Once you have
made a Factory Reset you will have to re-install your preferences and re-scan
your channels. To reset your receiver to factory default, apply the following steps:
1. Select "Factory Reset" and press SELECT.
2. Enter your PIN Code. The receiver will reset itself to the original factory
3. Before using the function "Automatic Scan search" (see 5.1.4.3), select
Note: Your PIN code will change back to the factory setting "0000".

5.1.4.2 Channel Set-Up

The channel set-up is for downloading all DVB-T available TV and Radio channels. There
are two possibilities for downloading the services:
Automatic Scan search:
1. Press the Menu button
2. Using UP/DOWN keys, select "Installation" and press SELECT.
3. Using UP/DOWN keys, select "Channel Set-up" and press SELECT.
4. Using UP/DOWN keys, select "Auto Scan" and press SELECT.
5. The screen "Auto Detection" appears first. Thereafter the screen "Auto
Advanced (Manual) Scan search:
1. Press the Menu button
2. Using UP/DOWN keys select "Installation" and press SELECT.
22
settings.
"Country selection" (5.1.4.2) first.
(Please see inside cover Screen 1, 23-25)
Scan". follows. Wait until the automatic scan has finished.