Strong SRT 5855 User Manual page 19

3. Press the Red button to save and proceed with another timer event.
4. Press the Green button to save and exit the timer menu.
5. Press the Yellow button to exit the timer menu WITHOUT saving the
Tip: You have to select the channel, starting time, and ending time settings if the Timer
mode is "Time interval". An error message will appear if any of the settings
are incorrect.
Action: You can select one of the following actions in the
timer mode.
Set the Date using the 0-9 numeric keys
Set the Hour using the 0-9 numeric keys (you may need to clear a
previous setting using the arrow left key)
Set the End Time if you are using "Interval Time"
Set the channel by pressing the Select key and choosing from the
pop up list.
settings.
"Power On": The receiver powers on at the
designated date and time.
"Time interval": The receiver switches on at the
designated date and time, displays the channel
and then switches off at the designated date and
time (The value set at the ending time).
"Power Off": The receiver powers off at the
designated date and time.
17