Strong SRT 5855 User Manual page 11

3. AUDIO Right and Left (Red &White RCA)
These connectors give you the possibility to connect the audio signal to an external
amplifier or to the audio input of your TV.
4. VIDEO (Yellow RCA)
This connector has a constant video signal for additional VCR-connections.
5. TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
6. VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart
cable. Your video signal will now be looped through to your TV.
7. IR SENSOR
Use this connector to connect an external remote eye if you wish to store your
receiver in a place where the IR on your receiver cannot communicate with the
remote. For example, if you wish to put your receiver in a closed environment such
as a well ventilated closet.
8. RS 232 Serial Port
This serial port can be used to connect your PC to your receiver, and enables you
to download new versions of software into your receiver.
Note: It is recommended to ONLY use the original software. Loading other versions of
software not adapted to your model number can cause severe damage to your
receiver, and will not be covered by the warranty.
9. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital audio
amplifier.
10. Power Cord
Your receiver requires a main voltage supply of 220 V AC 50/60 Hz +/- 5%. Make
sure to check the power supply specifications of the wall outlet before connecting
your receiver to main power!
9