Connection With Audio Cable Rca Connectors; Connection To A Digital Audio Amplifier Using The S/Pdif Output; Connecting A Remote Eye (Optional Accessory) - Strong SRT 5855 User Manual

Note: If you have a digital audio amplifier with a digital audio input, use the
S/PDIF output.
3.1.4 Connection with Audio/Video RCA Cable
On the back of your receiver you will find the RCA connectors (Audio Left &
Right – Red& white, Video – Yellow)
Install an audio/video cable between the RCA connectors of the receiver and
those of your TV set, VCR or amplifier.

3.1.5 Connection to a digital audio amplifier using the S/PDIF output

(Please see inside cover Figure 8)
Connect the S/PDIF out connector on the back of your receiver to the S/PDIF
input connector of your digital amplifier, using a coaxial cable.
Do not forget to turn the S/PDIF function on (Main menu > Installation >PIN
code "0000"> TV/VCR Settings > SPDIF Output > On)
3.1.6 Connecting a remote eye
Connect the IR sensor to your remote eye if you wish to store your receiver in a
place where the IR on your receiver cannot communicate with the remote.
For example, if you wish to put your receiver in a closed environment such as a well
ventilated closet.
(Please see inside cover Figure 9)
(Please see inside cover Figure 7)
13