Cable Connection - Strong DiSEqC Positioner v50 User Manaul

PART 1 • English
Index 888

5.0 CABLE CONNECTION

1. Connect the Motor to the terminals printed M1 & M2, and connect the Reed Switch
Sensor to the terminals printed SENSOR via Motor Cable.
p.s.: The wrong connection between Motor & Sensor might damage the Reed Switch
Sensor on the Actuator.
2. Connect one coaxial cable (RG-6/U is recommended) from the receiver to the rear panel
of the positioner printed To Receiver. Connect another coaxial cable from the positioner
to the LNB.
3. Plug the AC Power Cord into the AC outlet. 3 dots of the LED display will light on. Now
is the stand-by mode. The power of the Positioner will be turned on / off automatically
while the LNB power of receiver is turned on / off.
LNB
Index 1.888
Coaxial Cable
Motor Cable
Positioner
Optional Remote Control
Actuator or
H-H Mount
1K Indica for
Lights on
TV
Coaxal Cable
Receiver
Remote Control
of Receiver
5