Usb - Strong SRT 8100 User Manual

PART 1 • English
Set Password
Set or change the password for locked programs and menu access. Enter your old password or the default password
'8888'. You will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed,
press EXIT to exit the menu.
Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select Restore Factory Default and press OK or u to select. Enter your password or the default password
'8888' and press OK to confirm. This option will delete all preset channels and settings. The receiver will reboots and
start with Installation Guide menu.
Information
View model, hardware and software information.
Software update
If the status is set ON, it will scan new software from broadcast according to your preferred time in Start time.
Software update from USB
Download the required update file for your receiver model from our website http://www.strong.tv support page or
contact to your local dealer.
Unzip file, if necessary, and copy it to root folder of your USB storage device.
Connect USB storage device to the USB port of the receiver. Enter to the main Menu, select USB. Select Multimedia –
Music and press OK. In the file list select file with software image and press OK to start software update. Update
process will take some time. Once update is completed the receiver will display message "Update completed. Please
restart". Switch OFF main power and switch it back ON.
WARNING Do not power off your receiver during update process and flashing data. Do not unplug the USB
device during update. This may cause damage of the data in the flash memory and the receiver will
need to be repaired.

5.7 USB

Press MENU and select USB. The menu provides options to playback music, video files and watch photo files.
The unit supports USB devices with FAT and FAT32 file system and does not support NTFS.
5.7.1 Multimedia
If no USB device is plugged in, a warning message "No USB Device is Found" will be displayed, otherwise you can
select the music or photo type in this menu and press OK to enter the file browser and select the file to playback.
Music – supported file formats are MP3 and WMA.
Photo – supported file formats are JPG and BMP
Movie – supported video files in various formats (MPG, MPEG, TS, VOB, MP4, AVI,...)*
* STRONG cannot guarantee the playback of video files although extensions are listed here, as it depends on codec
used, data bit rate and resolution. Please consult the STRONG Hotline in your country to get more details.
5.7.2 Photo configuration
Slide Time:
You can adjust slide show interval to 1~8 seconds.
Slide Mode:
You can adjust slide show effect as mode 0~59 or random.
Aspect Ratio:
Keep Displays the picture as its original aspect,
Discard: Displays the picture in full screen mode.
5.7.3 Movie configuration
Aspect Ratio:
Keep: Plays movie in its original aspect.
Discard: Plays movie in full screen mode.
9