Video Setting; Channel Search - Strong SRT 8100 User Manual

PART 1 • English
To view program schedule on other channels use tu buttons.
To book reminder for desired event press OK button.
To display a list of booked event press INFO button.
5.1.2 Sort
Sort your channels from the following options:
By LCN Sort the channels in channel number order (ascending)
By ONID Sort the channels in order of Network ID (Broadcaster ID)
By Service Name Sort the channels in alphabetical order
Service ID
Sort the channels according to the station
5.1.3 LCN (Logical Channel Numbering)
Set LCN ON or OFF.

5.2 Video Setting

Press MENU then select Picture. The menu provides options to adjust the video settings. Press pq to select an option
and press tu to adjust the setting. Press EXIT to exit the menu.
Aspect Ratio
You can set the display format to either 4:3 PanScan, 4:3 Letter Box, 16:9 Full Screen or Auto to get the maximum
display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI.
480i: for NTSC system TV.
480P: for NTSC system TV.
576i: for PAL system TV.
576P: for PAL system TV.
720P: for NTSC or PAL system TV.
1080I: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the settings. This should match the most common setting for
TVs in your country.
NTSC: for NTSC system TV.
PAL: for PAL system TV.
Video output
CVBS:
CVBS output.
RGB: RGB output.

5.3 Channel Search

Press MENU and select Search Channel. The menu provides options to adjust the search channel settings. Select an
option and press tu to adjust the setting. Press EXIT to exit the menu.
Auto Search
Search and install all channels automatically. This option overwrites all early installed channels.
1. Select Auto Search and press OK or u to start channel search.
2. To cancel channel search, press EXIT.
Manual Search
Install new channels manually. This option adds new channels without changing the current channels list.
1. Select Manual Search then press OK or u. The channel search screen will appear.
2. Press the tu to select the channel frequency
3. Press OK to start searching channels
A found channel will be saved and added to the channels list. If channels can't be found, then exit the menu.
7