Table of Contents
Advertisement
Install Memory
The mainboard has three DIMM slots that can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard. You must install the first memory
module into DIMM1 so that the system can share some of the
memory with the built-in graphics system. A second module can be
installed in either DIMM2 or DIMM3.
For this mainboard, you must use 168-pin, 3.3V memory modules
installed with SDRAM memory chips. For best performance, we
recommend that you use PC-100 memory modules which operate
over a 100 MHz memory bus.
You can install any size of memory module from 16 MB up to 256
MB, so the maximum memory size is 3 x 256 MB = 768 MB.
The edge connectors on the memory modules have cut outs, which
coincide with struts in the DIMM slots, so the memory modules
can only be installed in the correct way.
On the DIMM slot, pull the locking latches at either end of the
slots outwards. Position the memory module correctly and insert it
into the DIMM slot. Press the module down into the slot so that the
locking latches lever inwards and lock the module in place.
!
DIMM1
DIMM2
DIMM3
11
Advertisement
Table of Contents
