MATSONIC MS6383E Manual page 14

! 


   
The socket-7 processor installs into the ZIF (Zero Insertion Force)
socket-7 on the mainboard.
1. Locate the socket-7 and FAN1. Pull the locking lever out from
the socket and swing it to the upright position.
2. On the socket-7 processor, identify the pin-1 corner by noting
that it has a slight bevel.
3. On the socket-7, identify the pin-1 corner. The pin-1 corner is
on the same side as the locking lever, closest to the top of the
lever when it is in the locked position.
4. Match the pin-1 corners and insert the socket-7 processor into
the socket. No force is required and the processor should drop
into place freely.
5. Swing the locking lever down and hook it under the catch on
the side of the socket. This locks the socket-7 processor in the
socket.
6. If the socket-7 processor is installed with a cooling fan
assembly, connect the cable from the fan to the CPU fan power
connector FAN1.
10
Socket-7
Pin-1 Corner
FAN1