Install Memory Modules; Installation Procedure - MATSONIC MS7057CT Manual

Install Memory Modules

For this mainboard, you
must use 168-pin 3.3V
non-buffered Dual In-line
Memory Modules
(DIMMs). The memory
chips are standard
SDRAM (Synchronous
Dynamic Random Ac-
cess Memory). The table
at the right shows the
supported frequencies.

Installation Procedure

The mainboard accommodates three memory modules. You
must install at least one module in any of the three slots. Each
module can be installed with 32 MB to 512 MB of memory;
total memory capacity is 512 MB.
1. Align the memory module with the slot. The DIMM
slots are keyed with notches and the DIMMs are keyed
Frontside Bus System Memory
(FSB) Bus (SMB)
Frequency Frequency
66 MHz 100 MHz
100 MHz 100 MHz
133 MHz 100 MHz
133 MHz 133 MHz
Note: The memory bus runs at either
100 MHz or 133 MHz independent of
the system bus frequency.
22