Power Management Setup Page - MATSONIC MS6383E Manual


! 

   

Power Management Setup Page

This page sets some of the parameters for the system power
management operation.
Power
Use this item to enable or disable the power
Management/APM
management routines. If you enable the power
management, you can use the items below to
set the power management operation.
Standby Time Out
This sets the timeout for standby mode in
(Minute)
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out
This sets the timeout for suspend mode in
(Minute)
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving suspend mode.
Keyboard Power
Your system can enter a software power down.
On
If you enable this item, you can resume the
system by pressing hot keys on the keyboard.
You must enable the jumper for Keyboard
Power On.
Lan Card Power
Your system can enter a software power down.
On
If you enable this item, the system can
automatically resume if there is traffic on the
network adapter.
28