Digital Audio Extension Bracket; Internal Digital Audio - MATSONIC MS6383E Manual

Digital Audio Extension Bracket

This bracket has two RCA jacks for digital audio in and digital
audio out, and an auxiliary jack for a stereo line-in device.
J5
CDI
1
Stereo Line-in
SPDIF In
SPDIF Out
Digital Audio
Extension Bracket
1. On the mainboard, locate the J5 SPDIF header for this bracket.
2. Plug the cable from the bracket into J5.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.

Internal Digital Audio

If you have the optional internal digital audio cable, you can use it
to connect the digital audio output connector of a CD-ROM or
DVD drive to the digital audio in connector CDI.
Note: If you have connected a digital audio bracket to J5,
You cannot use the CDI connector.

! 


   
17