Table of Contents
Advertisement
Mainboard Installation
To install this mainboard into your system, follow the procedures
in this chapter:
Identify the mainboard components
!
Install the correct processor
!
Install one or more memory modules
!
!
Verify that any jumpers or switches are at the correct setting
!
Install the mainboard in the system chassis
Install any other devices and make the appropriate connections
!
to the mainboard headers.
Note: Before installing the mainboard, you must ensure that
jumper JP6 is set to the Normal setting. See this chapter for
information on locating JP6 and changing the jumper setting.
Note: Please do not use the AC power cord to connect the system
case to a power outlet until you have completely installed the
mainboard and components. In some circumstances, the power
management of the system might damage components and create
unsafe conditions by allowing power to flow before the installation
is complete,
Chapter 2
Advertisement
Table of Contents
