Change Password; Change Or Remove The Password; Exit - MATSONIC MS6383E Manual

! 


   
CPU FAN Speed &
Use these items to set the parameters for the
VCCs
voltages that control the fans and the CPU
core. If the values deviate by an amount greater
than the values installed here, the hardware
monitoring will alert you with a warning.

Change Password

If you highlight this item and press Enter, a dialog box appears
which lets you enter a Supervisor password. You can enter no more
than six letters or numbers. Press Enter after you have typed in the
password. A second dialog box asks you to retype the password for
confirmation. Press Enter after you have retyped it correctly. The
password is required at boot time, or when the user enters the setup
utility.

Change or Remove the Password

Highlight this item and type in the current password. At the next
dialog box, type in the new password, or just press Enter to disable
password protection.

Exit

Highlight this item and press Enter to save the changes that you
have made in the setup utility and exit the setup program. When
the Save and Exit dialog box appears, press Y to save and exit, or
press N to exit without saving.
34