Fax/Modem Daa Module - MATSONIC MS6383E Manual

! 


   

Fax/Modem DAA Module

The Fax/Modem card plugs directly into the mainboard adjacent to
an expansion slot in the system chassis. When you remove the
blanking plate from the system chassis, you can access the LINE
and TEL RJ11 connectors on the metal edge of the Fax/Modem
DAA module.
JP10-MODEM Header
GND 1
2 MCLK
GND 3
4 FRA-SY
GND 5
6 SCLK
AUX 3V 7
8 RIN-WAK
HOOK 9
10 GPIO
RIN 11
12 SDO
AUX 5V 13
14 SDI
MUTE 15
16 RST
1. Locate the JP10 modem header on the mainboard.
2. Plug the Fax/Modem DAA module into the JP10 modem
header.
3. Remove the blanking plate adjacent to the Fax/Modem DAA
module.
Line & Tel
RJ11 Sockets
Modem Header
16
Modem DAA Module