Advertisement

©Copyright 1999
All Rights Reserved
Aladdin V, Version 1.1
October 1999
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does not
represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability
to use the product or documentation, even if advised of the possibility
of such damages.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
IBM, EGA, VGA, PC/XT, PC/AT, OS/2, and PS/2 are registered
trademarks of International Business Machines Corporation.
Microsoft, Windows, and MS-DOS are trademarks of Microsoft
Corporation.
Other Product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of
their respective companies.
Limitation of Liability While reasonable efforts have been made to ensure the
accuracy of this manual, the manufacturer and distributor assume no liability
resulting from errors or omissions in this manual, or from the use of the
information contained herein.
MS6261 User's Manual

1 Introduction ................................................................................................ 1
1.1 Specifications ...................................................................................... 1
System Chipset .................................................................................... 1
CPU..................................................................................................... 1
Voltage ................................................................................................ 1
Memory ............................................................................................... 1
Cache................................................................................................... 1
I/O........................................................................................................ 1
BIOS.................................................................................................... 1
Expansion Slots ................................................................................... 1
Dimension ........................................................................................... 1
Other .................................................................................................... 1
1.2 Unpacking the Mainboard................................................................... 2
1.3 Electrostatic Discharge Precautions .................................................... 3
1.4 Main Board Layout ............................................................................. 4
2 Hardware Setup .......................................................................................... 5
2.1 Memory Configuration........................................................................ 5
2.2 CPU Quick Installation Table ............................................................. 5
2.3 Jumper Settings ................................................................................... 6
JB1-CPU to Bus Frequency Ratio Setting........................................ 6
JC1-CPU Clock Setting .................................................................... 7
JV1-CPU Core Voltage Setting ........................................................ 8
JV2-CPU I/O Voltage Setting .......................................................... 9
JR1-ROM Voltage Setting.............................................................. 10
JBT1-CMOS Clear ......................................................................... 11
2.4 Connectors ........................................................................................ 12
J1-ATX Power Supply Connector .................................................. 12
J2-AT Power Supply ...................................................................... 13
CN6-System Pannel Connectors .................................................... 13
HDD-Hard Disk Activity LED................................................ 14
RST-Reset Switch ................................................................... 14
KBLock -Keylock & Power LED Connector .......................... 14
SPK-Speaker Connector .......................................................... 14
Suspend SW, Suspend LED....................................................... 14
MS6261 User's Manual
CONTENTS


Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS6261 and is the answer not in the manual?

Questions and answers

Summary of Contents for MATSONIC MS6261

  • Page 1: Table Of Contents

    MS6261 User’s Manual MS6261 User’s Manual CONTENTS ©Copyright 1999 All Rights Reserved Aladdin V, Version 1.1 October 1999 1 Introduction ....................1 1.1 Specifications ..................1 The information in this document is subject to change without prior System Chipset ..................1 notice in order to improve reliability, design and function and does not CPU.....................
  • Page 2 MS6261 User’s Manual FIR1-IR Connector ................. 14 FAN1, FAN2-Fan Connectors............15 CN4, CN5 -LAN Wake-Up Connectors .......... 15 COM1/COM2-Serial Port Connectors ........... 16 FDD-Floppy Drive Connector ............16 USB-USB Connector..............16 IDE1/IDE2-Primary/Secondary IDE Connectors......16 LPT-Printer Connector ..............16 CN1-PS/2 Mouse Connector .............. 16 CN3-Keyboard Connector ..............
  • Page 3: Introduction

    MS6261 User’s Manual MS6261 User’s Manual 1 INTRODUCTION 1.2 Unpacking the Mainboard 1.1 Specifications This mainboard comes in a sturdy cardboard shipping carton, which should contain the following items: System Chipset Aladdin-V M1542 and M1543C • This Mainboard • This User 75~550MHz, Intel Pentium P54C/P55C MMX, •...
  • Page 4: Electrostatic Discharge Precautions

    MS6261 User’s Manual MS6261 User’s Manual 1.3 Electrostatic Discharge Precautions 1.4 Main Board Layout Make sure you ground yourself before handling the mainboard or other system components. Electrostatic discharge can easily damage the components. Note that you must take special precautions when handling the mainboard in dry or air-conditioned environments.
  • Page 5: Hardware Setup

    MS6261 User’s Manual MS6261 User’s Manual 2 HARDWARE SETUP CPU CLK CPU Ratio CPU Core (JC1) (JB1) (JV1) AMD CPU This chapter shows you how to do the hardware setup of this mainboard .Besides the proper procedures listed below, this section K6-300MHz(66.8*4.5 2.2V)
  • Page 6: Jc1-Cpu Clock Setting

    MS6261 User’s Manual MS6261 User’s Manual     JV1-CPU Core Voltage Setting     JC1-CPU Clock Setting...
  • Page 7: Jv2-Cpu I/O Voltage Setting

    MS6261 User’s Manual MS6261 User’s Manual     JR1-ROM Voltage Setting     JV2 – CPU I/O Voltage Setting...
  • Page 8: Jbt1-Cmos Clear

    MS6261 User’s Manual MS6261 User’s Manual     JBT1-CMOS Clear 2.4 Connectors This section describes some of the connectors on the mainboard.                   J1-ATX Power Supply Connector The motherboard provides an ATX power supply connector. It is a twenty-pin male header connector.
  • Page 9: J2-At Power Supply

    MS6261 User’s Manual MS6261 User’s Manual     J2-AT Power Supply  H DD-Hard Disk Activity LED This connector connects to the hard disk activity indicator light on the case.     RST-Reset Switch The system board has a 2-pin connector for rebooting the computer without having to turn off the power switch.
  • Page 10: Fan1, Fan2-Fan Connectors

    MS6261 User’s Manual MS6261 User’s Manual     FAN1, FAN2-Fan Connectors     COM1/COM2-Serial Port Connectors This mainboard provides two 9 pin D-sub serial port connectors,COM1 and COM2.     FDD-Floppy Drive Connector This mainboard has a 2 x 17-pin floppy drive connector.
  • Page 11: Award Bios Setup

    MS6261 User’s Manual MS6261 User’s Manual 3 AWARD BIOS SETUP • find the original setup missing. Run the CMOS Setup program after you turn on the system. On-screen The ROM chips of your mainboard are configured with a customized Basic instructions explain how to use the program.
  • Page 12: Standard Cmos Setup

    MS6261 User’s Manual MS6261 User’s Manual  Standard CMOS Setup Standard CMOS Setup records some basic system hardware configuration and sets the system clock and error handling. Use this option to change configuration values when changing the system hardware setup or when the data stored in the CMOS memory gets lost or damaged.
  • Page 13 MS6261 User’s Manual MS6261 User’s Manual A short description of screen options (Figure 3-3) follows: CPU Internal Cache Choose Enabled (default) or Disabled.This option allows the enabling or disabling of the CPU internal cache. External Cache Choose Enabled (default) or Disabled.This option allows the enabling or disabling of the external cache memory.
  • Page 14: Chipset Features Setup

    MS6261 User’s Manual MS6261 User’s Manual  C hipset Features Setup Typematic Rate Range between 6 (default) and 30 characters per (Chars/Sec) second. This option controls the speed of repeating keystrokes. Chipset Features Setup changes the values of the chipset registers.These registers control the system options.
  • Page 15 MS6261 User’s Manual MS6261 User’s Manual L2 TAG RAM Size Choose 8 (default) or 10. The system uses tag bits to Host Read DRAM Choose Syn. (default) or Bypass. This item allows you determine the status of data in the L2 cache. Set this...
  • Page 16: Power Management Setup

    MS6261 User’s Manual MS6261 User’s Manual 3. Press <ESC> and follow the screen instructions to save or disregard your Power Management This option allows user to select the type (or degree) settings. of power saving and which is directly related to the...
  • Page 17: Pnp/Pci Configuration Setup

    MS6261 User’s Manual MS6261 User’s Manual     Video Off Option Choose Always On, Suspend -> Off(default), Susp, Choose Disabled, Instant-Off (default), or Delay 4sec Stby -> Off, or All Modes-> Off. -Off. Always On: Monitor will remain ON during the Power Instant-Off: The system will be powered Saving Mode.
  • Page 18: Load Bios Defaults

    MS6261 User’s Manual MS6261 User’s Manual     Load BIOS Defaults 2. Use one of the arrow keys to move between options and modify the selected options by using PgUp/PgDn/+/-keys. Load BIOS Defaults option allows you to load the troubleshooting default values A short description of screen options (Figure 3-6) follows: permanently stored in the BIOS ROM.
  • Page 19: Load Setup Defaults

    MS6261 User’s Manual MS6261 User’s Manual     Load Setup Defaults  I ntegrated Peripherals Setup 1. Choose “INTEGRATED PERIPHERALS SETUP”from the Main Menu, and a Load Setup Defaults option loads the default system values to the system configuration fields.
  • Page 20: Password Setting

    MS6261 User’s Manual MS6261 User’s Manual IDE Primary/Secondary Four IDE PIO (Programmed Input/Output) Onboard Serial Choose Auto (default), 3F8/IRQ4 , 2F8/IRQ3, Master Slave PIO fields let you set the PIO mode (0-4) for each of the 4 Port1/Port2 3E8/IRQ4, 2E8/IRQ3, or Disabled.
  • Page 21: Ide Hdd Auto Detection

    MS6261 User’s Manual MS6261 User’s Manual "Confirm Password:" 5. Enter the same password again to confirm the password and press <Enter>. 6. Move the cursor to Save & Exit to save the password. 7. To delete the password entered before, choose the "Password Setting" and press <Enter>.
  • Page 22: Software Driver Installation

    MS6261 User’s Manual 4 SOFTWARE DRIVER INSTALLATION The CD came with the package is free of charge, including all our products’drivers Please run the“Setup.exe”to install software in the following roots: Mainboard Driver for Intel Chips • Award PIIX4 INF update for Window 95 •...

Table of Contents