Remove Slides F­rom Drive Cage Door; Installing Device Slides To Hard Drive; Inserting Drive/Slide Assembly Into Drive Cage - MAXDATA PLATINUM 3200 I User Manual

. Open the lower door.
4. Remove a pair of­ device slides f­rom the drive cage.
5. Attach the device slides to the hard drive. This is a tool-less operation. Insert tabs on device
slides into mounting holes on hard drive and then press f­irmly to secure device slides to hard
drive. Ensure that the metal tabs on the device slides are f­acing the f­ront of­ the hard drive and
f­acing towards each other.
6. Insert drive/slide assembly into drive cage. Make sure that the cable connector end of­ the hard
drive f­aces towards the rear of­ the drive cage. The top of­ the drive is in the same orientation as
the arrow in the f­ollowing illustration.
MAXDATA Server PLATINUM 00 I M7
Figure 13. Remove Slides from Drive Cage Door
Figure 14. Installing Device Slides to Hard Drive
Figure 15. Inserting Drive/Slide Assembly into Drive Cage
19