Recovering BIOS Defaults
If you are not able to access the BIOS setup screens, the BIOS Defaults jumper will need to be used
to reset the system configuration.
1. Power down the system and unplug the power cord.
. Open the server chassis.
. Move the jumper from the default operating position (covering pins 1 and ) to the reset/clear
position (covering pins and ).
BIOS Default
Normal
Reset
4. Wait 5 seconds.
5. Move the jumper back to the default position (covering pins 1 and ).
6. Close the server chassis.
7. Power up the server.
8
2
3
J1E6
Figure 32. BIOS Defaults Jumper
Hardware Installations and Upgrades