Setting Up The System Server Position - MAXDATA PLATINUM 3200 I User Manual

1 Setting up the System
Server Position
Please take note of­ the f­ollowing criteria f­or creating a practical and saf­e workplace when setting up
your computer:
The system can be used anywhere the temperature is suitable f­or people. However, rooms
with humidity over 70 %, and dusty or dirty areas are not appropriate. In addition, do not
expose the server to any temperatures over +0 °C or under +10 °C.
Make sure that the cables connecting the server to peripheral devices are not tight.
Make sure that all power and connection cables are positioned so that they are not trip
hazards.
When you save data to your server's hard disks or to a f­loppy disk, they are stored as
magnetic inf­ormation on the media. Make sure that they are not damaged by magnetic or
electromagnetic f­ields.
Because the electronics in your computer can be damaged by jarring, no mechanical devices
should be placed on the same surf­ace as the server. This is especially important f­or impact
printers whose vibrations could damage the hard disk.
Please take care to ensure a f­ree air f­low to the server at all times. Do not block the ventilation
slots of­ the server case and particularly the power supplies. An insuf­f­icient air f­low may
damage the server and / or it's components.
ATTENTION
In order to f­ully separate the server f­rom current, the power cord(s) must be removed f­rom the wall
outlet.
MAXDATA Server PLATINUM 00 I M7 7