Server Board Features - MAXDATA PLATINUM 3200 I User Manual

4 Server Board Features

This chapter brief­ly describes the main f­eatures of­ the PLATINUM 00 I Server Board. It provides
a list of­ the server board f­eatures and diagrams showing the location of­ important components and
connections on the server board.
Table 4. Server Board Features
Feature
Server board
Processor
System memory
Chipset
Peripheral interfaces
Graphics
LAN
Add-in card slots
Server management
MAXDATA Server PLATINUM 00 I M7
Description
Intel S5520HC
®
One or two Intel Xeon 5500 processors with a thermal design power (TDP)
® ®
of up to 95 W
• 12 DIMM slots, 6 per processor, distributed over three memory channels
• Up to 96 GB system memory
• 800/1066/1333 MT/s ECC registered (RDIMM) or unbuffered (UDIMM)
DDR3 memory
• No mixing of RDIMMs and UDIMMs
• Intel ® 5520 Chipset IOH
• Intel 82801Jx I/O Controller Hub (ICH10R)
®
External connections:
• One DB-15 graphics port
• One serial DB9 port A
• Two RJ45 network ports for 10/100/1000 Mbps
• Four USB 2.0 ports (back panel)
Internal connections:
• Two USB connectors for each of the two USB 2.0 ports (2 leading to the
front)
• One type A USB 2.0 port
• One DH10 connector for serial B port
• Six SATA II ports
• One port for an optional SAS/SAS ROMB module
• One port for an optional remote management module 3
On-board ServerEngines LLC Pilot II controller with integrated 2D video
controller, 64 MB DDR2 memory, 8 MB of which is graphics memory
One Intel ® 82575EB controller with two ports for 10/100/1000 Mbps Ethernet
LAN
• One PCI-E 2.0 x16 slot (x8 connection)
• Three PCI-E 2.0 x8 slots
• One PCI-E 1.1 x8 slot (with a split SAS module socket x4 connection)
• One 5 V 32-bit / 33 MHz PCI slot
• An integrated IPMI 2.0-compliant baseboard management controller
• Support for remote management module 3 ("KVM over IP")
• Support for system management software
• Light-Guided Diagnostics on replaceable units (FRUs)