Accessories
– 1 control with marked settings
– 4 Spax screws 4 x 15 mm for
securing the switching unit
– 2 indicator light covers; one red, one
yellow
– 1 adhesive symbol for the "0" position
– 1 drilling template
– Sealing strip
CT 400 P installation instructions
Protection during transport
For protection during transport, the
switching unit a is secured to the
underside of tepan with two domed
nuts b.
^ Loosen the two domed nuts b to
remove the switching unit from the
threaded bolts.
Important:
To avoid scratching the worktop
during installation, the domed nuts
b should be screwed back on to the
bolts.
a Switching unit
b Domed nuts
c Temperature limiter
d Data plate
21