Download Print this page

Worktop Cut-Out - Miele CT 400 MP Operating And Installation Instructions

Built-in and mobile tepan
Hide thumbs


Table of Contents

Worktop cut-out

^ Prepare the worktop cut-out as
shown in the diagram.
Make sure that the distance between
the worktop cut-out and the edge of
the worktop is at least 50 mm.
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
CT 400 P installation instructions


Table of Contents

  Related Manuals for Miele CT 400 MP

This manual is also suitable for:

Ct 400 p