Download Print this page

Fitting The Tepan Plate - Miele CT 400 MP Operating And Installation Instructions

Built-in and mobile tepan
Hide thumbs


CT 400 P installation instructions

Fitting the tepan plate

When lowering the tepan into the
cut-out, ensure that the cables do
not get trapped or damaged.
^ Feed the connection cable down
through the cut-out.
^ Carefully lower the tepan into the
cut-out. When doing this, make sure
that the Miele logo a is positioned
above the switching unit (see
^ Connect the tepan plate to the mains
electricity supply (AC 230 V / 50 Hz).
^ Any of the sealing strip which
protrudes above the worktop should
be removed using a sharp knife.



  Related Manuals for Miele CT 400 MP

This manual is also suitable for:

Ct 400 p