Do you have a question about the LEGEND 3000 and is the answer not in the manual?
Questions and answers
SERGIO DIAS BAPTISTA
February 20, 2025
how to address a channel to monitor while I'm recording?
1 comments:
Mr. Anderson
May 14, 2025
To address a channel to monitor while recording on the Midas LEGEND 3000, follow these steps:
1. Press and hold the LOCK switch for 3 seconds to enter ASSIGNMENT mode. Ensure the LED is off to confirm the system is unlocked.
2. Press and hold the desired VCA button until its LED starts flashing. This indicates that the input channel LEDs now show VCA assignments to the Monitor signal path.
3. Use the input channel switches to set up the desired assignment: - A long press enables multiple assignments. - A short press clears previous assignments.
4. Press the SET switch on each input channel you want to assign to the monitor. A long press replaces all previous assignments.
This process assigns channels to the monitor path for recording.
18-input digital mixer for ipad/android tablets with 16 midas pro preamps, integrated wifi module and multi-channel usb audio interface, 12-input digital mixer for ipad/android tablets with 4 midas pro preamps, 8 line inputs, integrated wifi module and us (48 pages)
Need help?
Do you have a question about the LEGEND 3000 and is the answer not in the manual?
Questions and answers
how to address a channel to monitor while I'm recording?
To address a channel to monitor while recording on the Midas LEGEND 3000, follow these steps:
1. Press and hold the LOCK switch for 3 seconds to enter ASSIGNMENT mode. Ensure the LED is off to confirm the system is unlocked.
2. Press and hold the desired VCA button until its LED starts flashing. This indicates that the input channel LEDs now show VCA assignments to the Monitor signal path.
3. Use the input channel switches to set up the desired assignment:
- A long press enables multiple assignments.
- A short press clears previous assignments.
4. Press the SET switch on each input channel you want to assign to the monitor. A long press replaces all previous assignments.
This process assigns channels to the monitor path for recording.
This answer is automatically generated